Disc Makers ReflexMax1 Betriebsanweisung PDF herunterladen (Seite 5)

The ReflexMax1 DVD is a high performance DVD±R/CD-R one-to-one disc dupli-

cator designed for both the novice and professional user. The ReflexMax1 DVD

is designed for a variety of applications that require the exchange of audio,

video or data content. The following is a User Guide that outlines the menu

commands of the unit and immediate functions of the unit. For additional tech-

nical support, please call 1-888-800-4041.

GETTING STARTED

Carefully remove the ReflexMax1 DVD duplicator from its shipping container.

Please inspect the contents and verify them against the packing slip. Be sure

to report any errors in shipping immediately to Disc Makers.

Packing materials: Please save the original box and packaging in the event the

unit requires future service or you need to move the unit from one location to

another. This will help reduce the possibility of damage in transit.

Please Note: Any item that needs to be returned for a warranty repair must be

returned in original packaging.

INSTALLATION AND SETUP

1. Unpack the ReflexMax1 DVD and place the unit in a clean and cool work area.

Keep the external packaging for future storage and transportation.

2. Place the ReflexMax1 on a flat, clean, and dust-free surface.

3. Connect the power cord from the back of the unit to an electrical outlet. Do

not bypass the Ground.

4. The Front panel should appear as below.

FUNCTIONS

1. COPY

1. Power on the system by pressing the button on the lower right front of the

unit. You will then see the system initializing and performing a self test on

the front panel LCD. The LCD will display Detect Drives, and then switch to

Copy mode.

2. To begin the duplication operation, load the top drive (reader) with a master

disc. Load the lower drive (writer) with high quality DVD-R, DVD+R, or CD-R

media.

3. Press the ENT button to begin duplicating. The unit will automatically ana-

lyze the master disc (this may take a few moments), and begin duplicating

at the maximum recording speed.

4. The LCD will display OK when the duplication is complete and the number of

successfully copied discs. (See screen display below.) Upon successful

duplication, the copied disc will be ejected. If the duplication fails, the disc

will remain in the bottom drive until the eject button on the drive is pressed.

To continue the same duplication job; reload the writer drive with another blank

recordable disc and press the ENT button to start duplicating again. To start a

new duplication job, place a new master disc in the top reader drive.

2. TEST

The Test Function is used to check whether a disc will successfully copy. It

simulates the copying process. No data will be written to the recordable media.

1. Select the Test Function using the UP and DOWN arrows.

1-888-800-4041 www.discmakers.com

Getting Started

Copy

OK: 01

1 2 3 4 5 6 7 8 9

Kommentare zu diesen Handbüchern

Keine Kommentare

Disc Makers ReflexMax1 Betriebsanweisung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Medienduplikatoren Disc Makers ReflexMax1