5. After selecting a track to copy press the UP arrow until End appears. In this
example, one track is selected and the time for this track is 2:41. If four
tracks were selected, the screen would show 4 Trk and give the total time for
all four tracks.
6. Press the ENT button and the ReflexMax1 will ask if all the selections are
made for this CD. Use the UP or DOWN arrow to change between Ye s and No.
Pressing ENT with No on the LCD will take the user back to Select Track.
Pressing ENT with Ye s on the screen will start the copying of the track (or
tracks) to the blank target CD.
7. When the copying is complete the unit will display Burn Complete! OK: 01.
Press the ENT button. The LCD will display Continue edit next Disc? NO. To
change to another CD, load the top drive (reader) with another master disc,.
Press the up arrow to change the No to Ye s and press ENT. This will take you
to the screen from step 3. Repeat steps 3 through 6 to put additional tracks
on the blank target CD.
8. When there are no more tracks to write to the CD leave the Continue
edit next Disc? NO set to No and press the ENT key again. The following
screen will appear:
Press ENT and the ReflexMax1 will close the CD. Once the CD is closed, you can-
not copy any additional tracks to the disc.
Note: the Edit Track CD to CD Edit is the only function enabled for the
ReflexMax1 in the Edit Track section.
11. SETUP
The Setup Function allows you to specify specific parameters for copying
discs. There are 16 sub items. From the main menu screen pressing ENT will
show the sub heading. Pressing the UP and DOWN arrows allows the user to
move between the settings.
1. Language: allows the user to set English or Spanish as the display language.
2. CD Burn Speed: allows the user to change the speed at which the unit burns
CD-R recordable media. By pressing the “ENT” button the current setting will
be displayed. The user can then press the UP and DOWN arrows to change to
the desired speed. Pressing the ENT button will set the speed. Press ESC to
go back to the main menu.
3. DVD Burn Speed: allows the user to change the speed at which the unit
burns DVD-R and DVD+R recordable media. By pressing the ENT button the
current setting will be displayed. The user can then press the UP and DOWN
arrows to change to the desired speed. Pressing the ENT button will set the
speed. Press ESC to go back to the main menu.
4. Read Speed: The read speed can be changed after the master disc is placed
in the reader drive. With a disc in the reader drive and 11.04 Read Speed
showing in the LED window, press ENT then the up or down arrows to scroll
through the usable read speeds. When the desired speed is displayed press
1-888-800-4041 www.discmakers.com
T
07
Functoins
Select Track:
End 1 Trk 02:41
End edit disc
and burn? YES
Close all discs
session? YES
(52 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern